CAR BATTERIES

June 26, 2019

Car batteries can be unpredictable and fail at the most inconvenient of times.

The car battery is the heart of your vehicle’s electrical system, powering the car and its electrical components.

A modern battery will usually last between 1 to 4 years, depending on the usage.

There are many things to take into consideration when buying a battery; environment conditions, driving habits, climate and use of powered accessories. All of these factors can significantly impact on the battery service life and reliability.

Most battery stockists will offer free testing of your existing battery. This allows them to assess your batteries condition and helps ensure a battery replacement can occur prior to an emergency breakdown situation occurring.

Causes for Battery Failure can include:

• Infrequent use of vehicle
• Sulphation
• Electrolyte starvation (low water level)
• Vibration
• Overcharging
• Undercharging
• Battery Corrosion
• Open Circuit Failure
• Short Circuit Failure

The most common reason for battery failure is that the vehicle has not been used for some time.

If possible, keep batteries fully charged either with regular daily use, ensuring that your alternator and charging systems are fully functional and set to appropriate charging voltage.

If this is not possible you can use a maintenance charger. Depending on the size of the battery – maintenance charges are available from 0.75 amps upwards.

Products like these are designed to top up the battery after use, and then switch to what is called a floating mode with enough power to keep the battery at optimum charge.

If you do need to replace your battery and decide to change it over yourself you may want to take a couple of things into consideration:

1. Disconnecting the battery will clear all codes used to maintain the memory of security codes, radio pre-sets etc
2. Battery acid is corrosive and will damage paintwork

How to change the car battery

Step 1 – Disconnect the batteryPark your car on level ground with the parking brake on and the gear in first for a manual or park for an automatic transmission. Turn key off and remove. Remove the negative terminal first – it’s the one with the minus ‘-‘ sign – then remove the positive terminal.  You may want to wear gloves as an added safety precaution.
Step 2 – Remove battery restraintsRemove the battery restraints or other hardware holding the battery down. Keeping the battery upright at all times, remove it from the tray.
Step 3 – Inspect and clean terminal check battery cables for damage and corrosion Clean the insides of each terminal with the battery terminal and post cleaner. Wipe terminals clean. Ro prevents corrosive deposits from forming, coat the terminals with anti-corrosion terminal grease.
Step 4 – Install new battery keeping upright at all times, place the new battery onto the tray. Make sure the positive and negative terminals are on the correct side. Replace the restraints securely.
Step 5 – Reconnect battery terminals connect the battery terminal – positive first, then negative. Start the vehicle.